Technogym RUN NOW EXCITE + - Low Kit Menu; Low Kit Version

RUN NOW Excite +: Technical Service guide - rev. 6.2
Pagina 9.23
9.3.8. LOW KIT MENU
This function directly accesses the firmware of the inverter. To access this menu, when the LED
display shows:
LOW KIT MENU
press ENTER. This function is structured as follows:
LOW KIT MENU
Low Kit Version
Config. Registers
9.3.8.1. Low kit version
This function displays the inverter firmware version. To access this menu, when the LED display
shows:
LOW KIT VERSION
press ENTER, the following message appears:
H:x L:x B:x
Which identifies the firmware version.