Technogym RUN NOW EXCITE + - Default Setting; Operating Data

RUN NOW Excite +: Technical Service guide - rev. 6.2
Pagina 9.19
9.3.4.3. Default setting
To load the default parameter values to the display, scroll using the +/- keys until the LED display
shows:
DEFAULT SETTING ?
press ENTER to load the default parameter values, and return to the upper menu level by pressing
CLEAR for a few seconds.
To write these parameters to the low kit, use the “Write to low kit” function.
9.3.5. OPERATING DATA
This function makes it possible to access the machine usage data stored in the low kit. To access
this menu, when the display shows:
OPERATING DATA
press ENTER. This function is structured as follows:
OPERATING DATA
Life Kit H
Life AC M
WRITE TO
LOW KIT ?
READ FROM
LOW KIT ?
Life DC M
Life Kit L
Tot. Km
In addition to the machine usage data, this function also includes the 2 sub-functions described below: