Technogym RUN NOW EXCITE + - Page 221

RUN NOW Excite +: Technical Service guide - rev. 6.2
Pagina 9.15
TECHNICAL
CONFIGURATION
OPERATING
DATA
KEY READER
VERS.
LOW KIT
PARAM.
UPDOWN
SETTINGS
HIGH KIT
VERSION
MAINS
VOLTAGE
(
AT UL )
ERRORS LOG
STANDARD
SETTINGS
BOOT
VERSION
LOW KIT
MENU
To scroll through the list of parameters, press the + or – effort level keys to display the next or the
preceding item.
To modify a parameter value, it is necessary to press the ENTER key: when the current parameter
value starts to blink, press the CLEAR key to erase the current value and then use the number keys
to enter the desired new value. Save the changes made by pressing the ENTER key.
To cancel the operation, press the CLEAR key for a few seconds.
The various parameters are described below.