Operating the Calculator 190
Notes:
Menu Item Description
Clear a–z Clears (deletes) all single-character variable names in the
current folder, unless the variables are locked or
archived. You will be prompted to press
¸ to confirm
the action.
Single-character variable names are often used in
symbolic calculations such as:
solve(a¦x
2
+b¦x+c=0,x)
If any of the variables have already been assigned a
value, your calculation may produce misleading results.
To prevent this, you can select 1:Clear a–z before
beginning the calculation.
NewProb Places NewProb in the entry line. You must then press
¸ to execute the command.
NewProb performs a variety of operations that let you
begin a new problem from a cleared state without
resetting the memory:
• Clears all single-character variable names in the current
folder (same as
1:Clear a–z), unless the variables are
locked or archived.
• Turns off all functions and stat plots (
FnOff and
PlotsOff) in the current graphing mode.
•Performs
ClrDraw, ClrErr, ClrGraph, ClrHome,
ClrIO, and ClrTable.
Restore
custom
default
If a custom menu other than the default is in effect, this
lets you restore the default. Refer to the Calculator Home
Screen module for information on the custom menu.
To Next Page
Loading...
Need help?
General
