Texas Instruments Titanium TI-89 - Quartreg Math;Statistics;Regressions Menu

860 Appendix A: Functions and Instructions
Note: list1 through list4 must be a variable name
or c1–c99. (columns in the last data variable
shown in the Data/Matrix Editor).
list5 does not
have to be a variable name and cannot be c1–c99
.
¸
Regeq(x)
"y1(x) ¸ Done
NewPlot 1,1,L1,L2
¸ Done
¥%
QuartReg MATH/Statistics/Regressions menu
QuartReg list1 , list2 [, [ list3 ] [, list4 , list5 ]]
Calculates the quartic polynomial regression and
updates the system statistics variables.
All the lists must have equal dimensions except
for
list5 .
list1 represents xlist.
list2 represents ylist.
list3 represents frequency.
list4 represents category codes.
list5 represents category include list.
Note:
list1 through list4 must be a variable name
or c1–c99 (columns in the last data variable
shown in the Data/Matrix Editor).
list5 does not
have to be a variable name and cannot be c1–
c99.
In function graphing mode:
{ë 2,ë 1,0,1,2,3,4,5,6}! L1 ¸
{ë 2 ë 1 0 ...}
{4,3,1,2,4,2,1,4,6}
! L2 ¸
{4 3 1 ...}
QuartReg L1,L2
¸ Done
ShowStat
¸
¸
Regeq(x)
"y1(x) ¸ Done
NewPlot 1,1,L1,L2
¸ Done
¥%