Texas Instruments Titanium TI-89 User Manual

Data/Matrix Editor 531
Clearing a Header Definition
Clearing a Header DefinitionClearing a Header Definition
Clearing a Header Definition
1. Move the cursor to any cell in the column and press †.
– or –
Move the cursor to the header cell (
c1, c2, etc.) and press ¸.
2. Press M to clear the highlighted expression.
3. Press ¸, D, or C.
Using an Existing List as a Column
Using an Existing List as a ColumnUsing an Existing List as a Column
Using an Existing List as a Column
Suppose you have one or more existing lists, and you want to use those existing lists as
columns in a data variable.
From the: Do this:
Data/Matrix Editor
In the applicable column, use
† to
define the column header. Refer to the
existing list variable. For example:
c1=list1
Home screen or a program Use the NewData command as
described in the Technical Reference
module. For example:
Ê Data variable. If this data variable already exists, it will be redefined
based on the specified lists.
Ë Existing list variables to copy to columns in the data variable.
NewData datavar, list1 [, list2] [, list3] ...
Ê Ë

Texas Instruments Titanium TI-89 Specifications

General

Brand	Texas Instruments
Model	Titanium TI-89
Category	Calculator
Language	English