Thermo Scientific Micro-Tech 9101 - Page 142

A-20 Micro-Tech 9101/9201 Reference Manual, Rev J Thermo Fisher Scientific
1. Press the No button (meaning you do not want to change the span),
and the following screen appears.
2. Press the Run button and the following screen appears.
3. Press the Run button and the Micro-Tech Run screen reappears, as
shown below.
BATCH
SPAN UNCHANGED
New span # xxxxxx
Old span # xxxxxx
READY
ALARM
CALIB
REPEAT
RUN
ADV
BATCH
Remove weight
before returning to
normal operation ! !
READY
ALARM
CALIB
NO
RUN
ADV
BATCH
xxxxx.x Tons
xxx.x Tph
READY
ALARM
CALIB
TOTALS