Initializing the Micro-Tech
Initializing the Software
Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J 2-17
2. Press the Edit button. (The Micro-Tech clears the hour entry field
leaving just the underline.)
3. Use the keypad to enter the correct hour. Remember to enter two
numbers for hour.
4. Press the Enter button.
5. Press the down-arrow button to move to the minute field.
6. Press the Edit button. (The Micro-Tech clears the minute entry field
leaving just the underline.)
7. Use the keypad to enter the correct minutes. Remember to enter two
numbers for minutes.
8. Press the Enter button.
9. Press the “AM/PM” button to toggle the setting to “PM.” Your
screen should now look something like this.
- Time 2:00 am
- Time 2:09 pm
AM/PM EDIT
To Next Page
Loading...
