Initializing the Micro-Tech
Initializing the Software
Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J 2-39
12. When the count-down reaches zero, the following screen appears,
telling you how many feet of belt in total was tested, and the time
(in seconds) it took to complete the test. (The data in your screen
will, of course, be different.)
(In our example, belt length =120 ft. So, 600 feet [120 x 5] were tested
during five revolutions of the belt.)
13. Press the Continue button and the following screen appears. The
Micro-Tech is now setting the appropriate span number for the
scale.
BATCH
TEST DURATION
Length = 600 ft
Time = 375 sec
READY ALARM CALIB
in
progress
To Next Page
Loading...
