THOMSON Amethyst III User Manual

Chapter 3 ’Web Browser Interface’ — Interface Description
132 Amethyst III DTV Smart Switch
User Manual
IP Output Item
Figure 3-81. IP Output dialog box
The following parameters shall be set:
Ethernet Area
 Interface: select an Ethernet port from the drop-down list.
Parameters Area
 Name: enter a name for the output, at your convenience. This name is
used in the Switches supervision tab for a better readability.
 Deactivate output if level is critical: if enabled and both inputs are in a
critical state, no signal is sent to output.
 Output: select an output from the drop-down list.
Masquerading Area
 Masquerading box: check the box if you want to change all
transmission parameters or part of them:

THOMSON Amethyst III Specifications

General

Brand	THOMSON
Model	Amethyst III
Category	Switch
Language	English