THOMSON Amethyst III User Manual

Chapter 3 ’Web Browser Interface’ — Basic Settings
72 Amethyst III DTV Smart Switch
User Manual
Basic Settings
This section and the following one ( ’Advanced Settings’ ) contain a
step-by-step operating procedure that will introduce you to the
capabilities and features of Amethyst
III.
The steps for basic settings are the following:
 ’Creating a New Configuration’
 ’Setting the Input Parameters’
 ’Setting the Switch Parameters’
 ’Setting the Output Parameters’
 ’Setting the GigE Interface Parameters (for IP Amethyst III)’
 ’Setting an IP Forwarding (for IP Amethyst III)’
 ’Editing a Tests Group’
 ’Getting an Overview of the Switches Status’
 ’Getting an Overview of the Quality of Service’
 ’Performing a Manual Switching’
 ’Setting the Outputs for Monitoring’
Only basic settings are developed in this section. For advanced settings,
refer to section
Section ’Advanced Settings’ on page 95.

THOMSON Amethyst III Specifications

General

Brand	THOMSON
Model	Amethyst III
Category	Switch
Language	English