THOMSON Amethyst III User Manual

Chapter 3 ’Web Browser Interface’ — Basic Settings
Amethyst III DTV Smart Switch 93
User Manual
Setting the Outputs for Monitoring
In ASI, all the outputs that are not configured in the main configuration
are automatically considered as monitoring outputs.
In IP, you must explicitly add monitoring outputs in your configuration.
To do so, in your main configuration, right-click the Outputs item, choose
Add and select Monitoring IP.
Figure 3-38. Specifying an IP monitoring output
You can then define what content should be sent to monitoring outputs
(ASI or IP, the process is the same). To do so:
1. Go to the Outputs tab.
Figure 3-39. Supervising the ASI outputs
for ASI outputs

THOMSON Amethyst III Specifications

General

Brand	THOMSON
Model	Amethyst III
Category	Switch
Language	English