Chapter 4 ’Servicing’ — Replacing the Lithium Battery
186 Amethyst III DTV Smart Switch
User Manual
Step 3: Inserting the New Battery
1.
Check that the voltage level of the new battery is far beyond +2.9V.
2.
Insert the new battery (markings visible to the operator) into its holder.
3.
Check the battery is properly clipped in by gently pressing down on it.
4.
Put the cover back on and screw down the 8 screws to a torque of 0.6
N/m - Do not exceed a torque of 0.9 N/m so as not to damage the
screws.
Step 4: Checking that the New Battery Works
1.
Turn back on the platform.
2.
Check that the "Battery Failure" alarm has disappeared.
To Next Page
