TP-Link Jetstream TL-SL2428P - Example for Poe Configurations; Network Requirements; Configuring Scheme; Using the GUI

User Guide 84
Managing System Example for PoE Configurations
9
Example for PoE Configurations
9.1 Network Requirements
The network topology of a company is shown as below. Camera1 and Camera2 work for
the security of the company and cannot be power off all the time. AP1 and AP2 provide the
internet service and only work in the office time.
Figure 9-1 Network Topology
Gi1/0/1
Gi1/0/2 Gi1/0/3
Gi1/0/4
Camera1 Camera2 AP1 AP2
Switch A
9.2 Configuring Scheme
To implement this requirement, you can set a PoE time-range as the office time, for
example, from 08:30 to 18:00 on work days. Then apply the settings to port 1/0/3 and
1/0/4. Port 1/0/1 and port1/0/2 need to supply power all the time, so the time range
configurations can be left as the default settings here.
9.3 Using the GUI
The configurations of port 1/0/4 is similar with the configurations of port 1/0/3. Here we
take port 1/0/3 for example.
1) Choose the menu SYSTEM > Time Range > Time Range Create and click to
load the following page.
Downloaded from ManualsNet.com search engine