TP-Link Jetstream TL-SL2428P - Monitoring the Memory; Using the GUI; Using the CLI

User Guide 728
Monitoring the System Monitoring the Memory
3
Monitoring the Memory
3.1 Using the GUI
Choose the menu MAINTENANCE > System Monitor > Memory Monitor to load the
following page.
Figure 3-1 Monitoing the Memory
Click Monitor to enable the switch to monitor and display its memory utilization rate every
five seconds.
3.2 Using the CLI
On privileged EXEC mode or any other configuration mode, you can use the following
command to view the memory utilization:
show memory-utilization
View the current memory utilization of the switch.
The following example shows how to monitor the memory:
Switch#show memory-utilization
Downloaded from ManualsNet.com search engine