TP-Link Jetstream TL-SL2428P - Port Isolation Configurations; Using the GUI

Managing Physical Interfaces Port Isolation Configurations
User Guide 97
3
Port Isolation Configurations
3.1 Using the GUI
Port Isolation is used to limit the data transmitted by a port. The isolated port can only send
packets to the ports specified in its Forwarding Port List.
Choose the menu L2 FEATURES > Switching > Port > Port Isolation to load the following
page.
Figure 3-1 Port Isolation List
The above page displays the port isolation list. Click to configure Port Isolation on
the following page.
Downloaded from ManualsNet.com search engine