User Guide 532
Configuring AAA AAA Configuration
2.1.2 Configuring Server Groups
The switch has two built-in server groups, one for RADIUS servers and the other for
TACACS+ servers. The servers running the same protocol are automatically added to the
default server group. You can add new server groups as needed.
Choose the menu SECURITY > AAA > Server Group to load the following page.
Figure 2-3 Add New Server Group
There are two default server groups in the list. You can edit the default server groups or
follow these steps to configure a new server group:
1) Click and the following window will pop up.
Figure 2-4 Add Server Group
Configure the following parameters:
Server Group Specify a name for the server group.
Server Type Select the server type for the group. The following options are provided: RADIUS
and TACACS+.
Server IP Select the IP address of the server which will be added to the server group.
2) Click Create.
2.1.3 Configuring the Method List
A method list describes the authentication methods and their sequence to authenticate
the users. The switch supports Login Method List for users of all types to gain access to
the switch, and Enable Method List for guests to get administrative privileges.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
