TP-Link Jetstream TL-SL2428P - Appendix: Default Parameters

User Guide 692
Configuring IPv6 IMPB Appendix: Default Parameters
6
Appendix: Default Parameters
Default settings of DHCP Snooping are listed in the following table:
Table 6-1 DHCPv6 Snooping
Parameter Default Setting
Global Config
DHCPv6 Snooping Disabled
VLAN Config
Status Disabled
Port Config
Maximum Entry 512
Default settings of ND Detection are listed in the following table:
Table 6-2 ND Detection
Parameter Default Setting
Global Config
ND Detection Disabled
VLAN Config
Status Disabled
Log Status Disabled
Port Config
Trust Status Disabled
ND Statistics
Auto Refresh Disabled
Refresh Interval 5 seconds
Downloaded from ManualsNet.com search engine