User Guide 826
Configuring System Logs System Logs Configurations
2.1.4 Viewing the Log Table
Choose the menu MAINTENANCE > Logs > Log Table to load the following page.
Figure 2-4 View the Log Table
Select a module and a severity to view the corresponding log information.
Time Displays the time the log event occurred. To get the exact time when the log event
occurs, you need to configure the system time on the SYSTEM > System Info >
System Time Web management page.
Module Select a module from the drop-down list to display the corresponding log information.
Severity Select a severity level to display the log information whose severity level value is the
same or smaller.
Content Displays the detailed information of the log event.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
