User Guide 822
Configuring System Logs Overview
1
Overview
The switch generates messages in response to events, faults, or errors occurred, as well
as changes in configuration or other occurrences. You can check system messages for
debugging and network management.
System logs can be saved in various destinations, such as the log buffer, log file or remote
log servers, depending on your configuration. Logs saved in the log buffer and log file are
called local logs, and logs saved in remote log servers are called remote logs. Remote logs
facilitate you to remotely monitor the running status of the network.
You can set the severity level of the log messages to control the type of log messages
saved in each destination.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
