TP-Link Jetstream TL-SL2428P - Dhcpv4 Filter Configuration; Using the GUI; Configuring the Basic Dhcpv4 Filter Parameters

User Guide 697
Configuring DHCP Filter DHCPv4 Filter Configuration
2
DHCPv4 Filter Configuration
To complete DHCPv4 Filter configuration, follow these steps:
1) Configure the basic DHCPv4 Filter parameters.
2) Configure legal DHCPv4 servers.
2.1 Using the GUI
2.1.1 Configuring the Basic DHCPv4 Filter Parameters
Choose the menu SECURITY > DHCP Filter > DHCPv4 Filter > Basic Config to load the
following page.
Figure 2-1 DHCPv4 Filter Basic Config
Follow these steps to complete the basic settings of DHCPv4 Filter:
1) In the Global Config section, enable DHCPv4 globally.
2) In the Port Config section, select one or more ports and configure the related
parameters.
Downloaded from ManualsNet.com search engine