TP-Link Jetstream TL-SL2428P - Disable SSH Login; Copy Running-Config Startup-Config

Accessing the Switch Command Line Interface Access
User Guide 17
Figure 3-16 Disable Telnet login
■ Using the CLI:
Switch#configure
Switch(config)#telnet disable
3.5 Disable SSH Login
You can shut down the SSH server to block any SSH access to the CLI interface.
■ Using the GUI:
Go to SECURITY > Access Security > SSH Config, disable the SSH server and click Apply.
Figure 3-17 Shut down SSH server
■ Using the CLI:
Switch#configure
Switch(config)#no ip ssh server
3.6 Copy running-config startup-config
The switch’s configuration files fall into two types: the running configuration file and the
start-up configuration file.
After you enter each command line, the modifications will be saved in the running
configuration file. The configurations will be lost when the switch reboots.
Downloaded from ManualsNet.com search engine