TP-Link Jetstream TL-SL2428P - IP-MAC Binding Configuration; Using the GUI; Binding Entries Manually

User Guide 632
Configuring IPv4 IMPB IP-MAC Binding Configuration
2
IP-MAC Binding Configuration
You can add IP-MAC Binding entries in three ways:
■ Manual Binding
■ Via ARP Scanning
■ Via DHCP Snooping
Additionally, you can view, search and edit the entries in the Binding Table.
2.1 Using the GUI
2.1.1 Binding Entries Manually
You can manually bind the IP address, MAC address, VLAN ID and the Port number
together on the condition that you have got the detailed information of the hosts.
Choose the menu SECURITY > IPv4 IMPB > IP-MAC Binding > Manual Binding and click
to load the following page.
Figure 2-1 Manual Binding
Follow these steps to manually create an IP-MAC Binding entry:
Downloaded from ManualsNet.com search engine