User Guide 16
Accessing the Switch Command Line Interface Access
5) Go to Connection > SSH > Auth. Click Browse to download the private key file to
PuTTY. Click Open to start the connection and negotiation.
Figure 3-14 Download the Private Key to PuTTY
6) After negotiation is completed, enter the username to log in. If you can log in without
entering the password, the key authentication completed successfully.
Figure 3-15 Log In to the Switch
Note:
The first time you log in, change the password to better protect your network and devices.
3.4 Disable Telnet Login
You can shut down the Telnet function to block any Telnet access to the CLI interface.
■ Using the GUI:
Go to SECURITY > Access Security > Telnet Config, disable the Telnet function and click
Apply.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
