TP-Link Jetstream TL-SL2428P - Appendix: Default Parameters

Configuring Spanning Tree Appendix: Default Parameters
User Guide 357
6
Appendix: Default Parameters
Default settings of the Spanning Tree feature are listed in the following table.
Table 6-1 Default Settings of the Global Parameters
Parameter Default Setting
Spanning-tree Disabled
Mode STP
CIST Priority 32768
Hello Time 2 seconds
Max Age 20 seconds
Forward Delay 15 seconds
Tx Hold Count 5 pps
Max Hops 20 hops
Table 6-2 Default Settings of the Port Parameters
Parameter Default Setting
Status Disabled
Priority 128
Ext-Path Cost Auto
In-Path Cost Auto
Edge Port Disabled
P2P Link Auto
MCheck ------
Table 6-3 Default Settings of the MSTP Instance
Parameter Default Setting
Status Disabled
Revision Level 0
Downloaded from ManualsNet.com search engine