TP-Link Jetstream TL-SL2428P - MAC Address Configurations; Using the GUI; Adding Static MAC Address Entries

Managing MAC Address Table MAC Address Configurations
User Guide 129
2
MAC Address Configurations
With MAC address table, you can:
■ Add static MAC address entries
■ Change the MAC address aging time
■ Add filtering address entries
■ View address table entries
2.1 Using the GUI
2.1.1 Adding Static MAC Address Entries
You can add static MAC address entries by manually specifying the desired MAC address
or binding dynamic MAC address entries.
■ Adding MAC Addresses Manually
Choose the menu L2 FEATURES > Switching > MAC Address > Static Address and click
to load the following page.
Figure 2-1 Adding MAC Addresses Manually
Follow these steps to add a static MAC address entry:
1) Enter the MAC address, VLAN ID and select a port to bind them together as an address
entry.
Downloaded from ManualsNet.com search engine