TP-Link Jetstream TL-SL2428P - Using the GUI; Configuring the Poe Parameters Manually

User Guide 64
Managing System PoE Configurations (Only for Certain Devices)
6.1 Using the GUI
6.1.1 Configuring the PoE Parameters Manually
Choose the menu SYSTEM > PoE > PoE Config to load the following page.
Figure 6-1 Configuring PoE Parameters Manually
Follow these steps to configure the basic PoE parameters:
1) In the PoE Config section, you can view the current PoE parameters.
System Power
Limit (W)
Displays the maximum power the PoE switch can supply.
System Power
Consumption (W)
Displays the real-time system power consumption of the PoE switch.
System Power
Remain (W)
Displays the real-time system remaining power of the PoE switch.
In addition, you can click and configure the System Power Limit. Click Apply.
Downloaded from ManualsNet.com search engine