User Guide 703
Configuring DHCP Filter DHCPv6 Filter Configuration
3
DHCPv6 Filter Configuration
To complete DHCPv6 Filter configuration, follow these steps:
1) Configure the basic DHCPv6 Filter parameters.
2) Configure legal DHCPv6 servers.
3.1 Using the GUI
3.1.1 Configuring the Basic DHCPv6 Filter Parameters
Choose the menu SECURITY > DHCP Filter > DHCPv6 Filter > Basic Config to load the
following page.
Figure 3-1 DHCPv6 Filter Basic Config
Follow these steps to complete the basic settings of DHCPv6 Filter:
1) In the Global Config section, enable DHCPv6 globally.
2) In the Port Config section, select one or more ports and configure the related
parameters.
Port Displays the port number.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General