TP-Link Jetstream TL-SL2428P - Default Parameters for MLD Snooping

Configuring Layer 2 Multicast Appendix: Default Parameters
User Guide 295
8.2 Default Parameters for MLD Snooping
Table 8-2 Default Parameters of MLD Snooping
Function Parameter Default Setting
Global Settings of IGMP
Snooping
MLD Snooping Disabled
Unknown Multicast Groups Forward
MLD Snooping Settings in the
VLAN
MLD Snooping Disabled
Fast Leave Disabled
Report Suppression Disabled
Member Port Aging Time 260 seconds
Router Port Aging Time 300 seconds
Leave Time 1 second
MLD Snooping Querier Disabled
Query Interval 60 seconds
Maximum Response Time 10 seconds
Last Listener Query Interval 1 second
Last Listener Query Count 2
General Query Source IP ::
Static Router Ports None
Forbidden Router Ports None
MLD Snooping Settings on the
Port and LAG
MLD Snooping Enabled
Fast Leave Disabled
Static Multicast Group Settings Static Multicast Group Entries None
Downloaded from ManualsNet.com search engine