Managing System Appendix: Default Parameters
User Guide 89
Parameter Default Setting
Backup Config config2.cfg
Default setting of EEE is listed in the following table.
Table 10-6 Default Settings of EEE Configuration
Parameter Default Setting
Status Disabled
(For T1500-28PCT / TL-SG2210MP / TL-SG2210P) Default settings of PoE is listed in the
following table.
Table 10-7 Default Settings of PoE Configuration
Parameter Default Setting
PoE Config
System Power Limit 192.0 W (For T1500-28PCT)
150.0 W (For TL-SG2210MP)
58.0 W (For TL-SG2210P)
Port Config
PoE Status Enabled
PoE Priority Low
Power Limit (0.1 W-30.0 W) Class 4
Time Range No Limit
PoE Profile None
Profile Config
Profile Name None
PoE Status Enabled
PoE Priority Low
Power Limit Auto
Default settings of SDM Template are listed in the following table.
Table 10-8 Default Settings of SDM Template Configuration
Parameter Default Setting
Current Template ID Default
Next Template ID Default
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
