TP-Link Jetstream TL-SL2428P - Page 511

User Guide 488
Configuring QoS Configuration Examples
00:60:B9 Default NITSUKO
00:D0:1E Default PINTEL
00:E0:75 Default VERILINK
00:E0:BB Default 3COM
00:04:0D Default AVAYA1
00:1B:4F Default AVAYA2
00:04:13 Default SNOM
5) Enable Voice VLAN globally. Specify the VLAN ID as 2 and set the priority as 7.
Switch_A(config)#voice vlan 2
Switch_A(config)#voice vlan priority 7
6) Enable Voice VLAN on port 1/0/1 and port 1/0/2.
Switch_A(config)#interface fastEthernet 1/0/1
Switch_A(config-if)#voice vlan
Switch_A(config-if)#exit
Switch_A(config)#interface fastEthernet 1/0/2
Switch_A(config-if)#voice vlan
Switch_A(config-if)#end
Switch_A#copy running-config startup-config
Verify the configurations
Verify the basic VLAN configuration:
Switch_A(config)#show vlan brief
VLAN Name Status Ports
----- ----------------- --------- ----------------------------------------
1 System-VLAN active Fa1/0/1, Fa1/0/2, Fa1/0/3, Fa1/0/4,
Fa1/0/5, Fa1/0/6, Fa1/0/7, Fa1/0/8,
Fa1/0/9, Fa1/0/10, Fa1/0/11, Fa1/0/12,
Fa1/0/13, Fa1/0/14, Fa1/0/15, Fa1/0/16,
Fa1/0/17, Fa1/0/18, Fa1/0/19, Fa1/0/20,
Fa1/0/21, Fa1/0/22, Fa1/0/23, Fa1/0/24,
Gi1/0/25, Gi1/0/26, Gi1/0/27, Gi1/0/28
Downloaded from ManualsNet.com search engine