TP-Link Jetstream TL-SL2428P - Page 549

User Guide 526
Configuring Access Security Appendix: Default Parameters
Parameter Default Setting
Idle Timeout 120 seconds
Maximum Connections 5
Port 22
AES128-CBC Enabled
AES192-CBC Enabled
AES256-CBC Enabled
Blowfish-CBC Enabled
Cast128-CBC Enabled
3DES-CBC Enabled
HMAC-SHA1 Enabled
HMAC-MD5 Enabled
Key Type: SSH-2 RSA/DSA
Table 3-5 Default Settings of Telnet Configuration
Parameter Default Setting
Telnet Enabled
Port 23
Downloaded from ManualsNet.com search engine