User Guide 722
Configuring DoS Defend DoS Defend Configuration
Step 5 end
Return to privileged EXEC mode.
Step 6 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable the DoS Defend type named land:
Switch#configure
Switch(config)#ip dos-prevent
Switch(config)#ip dos-prevent type land
Switch(config)#show ip dos-prevent
DoS Prevention State: Enabled
Type Status
---- ------
Land Attack Enabled
Scan SYNFIN Disabled
Xmascan Disabled
NULL Scan Disabled
SYN sPort less 1024 Disabled
Blat Attack Disabled
Ping Flooding Disabled
SYN/SYN-ACK Flooding Disabled
WinNuke Attack Disabled
Smurf Attack Disabled
Ping Of Death Disabled
Switch(config)#end
Switch#copy running-config startup-config
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
