Trango Systems, Inc. GigaPlus User Manual Rev 3.1 108
Config Execute executes the config file just imported. The config should be saved after
the verification of proper operation.
.
Figure 50 Diagnostic Options
Loopback Auto runs a Linktest in the digital and IF loopback modes automatically so
that the link restores upon completion. This is very useful for running diagnostics on the
far end of a link where communication will be lost during the test. The Link will be
broken during the test so ensure that a maintenance window is planned. For a single
iteration the link will be down for up to 10 seconds.
To Next Page
Loading...