bootimage toggle: To switch current images back to the previous updated
image in a set of FPGA1, FPGA2, OS, FW. PIC and ODU firmware are not
allowed to be toggle back unless performing bootimage upgrade again.
bootimage upgrade: upgrade the required software images on the radio,
after the image is transferred on the radio via tftp.
<idu> option will upgrade all the IDU firmware in sequence of FPGA, OS,
FW, PIC from ONE tar file under /tmp/idu_GigaPlus_vX.X.tar “reboot” is
required after the idu upgrades.
<odu> option will upgrade ODU firmware with the file under
/tmp/odu_fw.bin or /tmp/rem_fw.bin (name is not exchangeable)
cableloss
cableloss <loss140> <loss315> <loss915>
Default: 0 for all three channels
Configuration Storage: Yes
cableloss without any parameter will display the current cableloss values
for the IF cable going to the ODU
Valid range of operation:
loss140: range 0-15, loss315: range 0-26, loss915: range 0-50
To Next Page
Loading...