Trango Systems TrangoLINK GigaPlus - Different Node Levels; View Node Command List

Trango Systems, Inc. GigaPlus User Manual Rev 3.1 138
Return to more recent commands in the history buffer after recalling commands with
the Up Arrow or Ctrl-P. Repeat the key sequence to recall successively more recent
commands.
Different Node Levels
View Node
This is the default node the users log in. This is strictly for viewing configuration
and statistics only. No configuration changes can be made at this level.
View Node Command List
acm
Display ACM feature status
alarm
Display Alarm status
alignment_sp
Display alignment mode status (SP ODUs only)
atpc
Display ATPC status
ber
Display ber test parameters
cableloss
Display Cable loss values (SP ODUs only)
config
Enable Trango configuration mode
cos
Display current status for class of service
datapath
Display datapath from FPGA
datapattern
Display data source for data pattern
date
Display Time of Day
default_opmode
Display default opmode status
egress_margin
Display the current egress margin setting
eth_info
Display ethernet port status and configuration
failover
Display failover (1+1 HSB) mode
fanctrl
Display Fan status
freq
Display Rf Tx/Rx frequency
guard_time
Display failover guard time
help
Display help command
httpd
Display Web server (httpd) status
Ibm
Display In Band Management configuration