Trango Systems, Inc. GigaPlus User Manual Rev 3.1 80
Weather Proofing Cabling
It is important to properly seal each antenna connection to protect against moisture and
corrosion. Trango Systems recommends using Coax-Seal which should be applied over
the ODU N-Type connector. Coax-Seal is a gum-like tape which is applied by wrapping
around the connector and then compressed/molded to form a single cohesive
protective covering over the connector.
To properly apply the Coax-Seal product first wrap the connector/case as shown in
Figure 28:
Figure 28 Weather Proofing of cable
Secondly, compress the Coax-Seal product to mold into a single protective covering
(Figure 29):
Figure 29 Complete weather proofing of cable
To Next Page
Loading...