Trango Systems TrangoLINK GigaPlus - Default_Opmode

Trango Systems, Inc. GigaPlus User Manual Rev 3.1 156
debug is a system-level command.
DESCRIPTION
Exit current node and enter the debug mode.
EXAMPLE
To enter debug mode
(trango-config)# debug
debug>
RELATED
cli
default_opmode
SYNTAX
default_opmode
default opmode [on | off]
Default: default operation mode OFF
Configuration Storage: Yes
default_opmode without any parameter will display the default
operational mode
DESCRIPTION
Set the default opmode to user specified input.
If ON, the system to power on with ready to be operational