Trango Systems TrangoLINK GigaPlus - Targetrssi; Tdm

Trango Systems, Inc. GigaPlus User Manual Rev 3.1 195
targetrssi
SYNTAX
targetrssi
targetrssi < -30 - 80 >
Default: -40
Configuration Storage: YES
targetrssi without any parameter will display the targetrssi of the
ODU
DESCRIPTION
Configure the target RSSI level that the ATPC and ODU gain control
will try to maintain. The number should be 2-3 dB below the
expected RSSI based on path calculations.
tdm
SYNTAX
tdm
Default: N/A
Configuration Storage: No
DESCRIPTION
Display TDM port mode and coding
For E1: HDB3
For T1: AMI or B8ZS
EXAMPLE
(CLI-config)# tdm
TDM Mode: ETH only
TDM Coding: HDB3