Trango Systems, Inc. GigaPlus User Manual Rev 3.1 197
temp without any parameter will display the current IDU and ODU
temperatures.
temp is a system-level command.
View the current temperatures of IDU and ODU. The temperature
reported is the temperature inside the unit in degrees Celcius.
For ODUs, the outside temperature is typically 20 degrees less than
the temperature that is read from the unit. For a 55 degree C
outside temp, the ODU would read approximately 75 deg. If
thresholds are used to trap events, ensure that this is taken into
consideration.
tftpd
tftpd <on | off>
Default: tftpd OFF.
Configuration Storage: Yes
tftpd without any parameter will display the current status for the
tftpd daemon
tftpd is a system-level command.
Turn on the tftp server. Used to transfer diagnostic file, configuration
file and software images during upgrades.
To Next Page
Loading...