Trango Systems TrangoLINK GigaPlus - Threshold

Trango Systems, Inc. GigaPlus User Manual Rev 3.1 198
threshold
SYNTAX
threshold action <0-8> <0-5>
threshold value <0-7> <-100 to 100>
Defaults: see the table below.
parameters
min
max
Action
RSSI
-85
-20
none
MSE
-45
-15
none
BER
0.00E+0
1.00E-4
none
BER
0.00E+0
1.00E-4
none
IDU temp
-10
55
none
ODU temp
-40
58
none
In port util
0.0
100.0
none
Out port util
0.0
100.0
none
Link Down
N/A
N/A
none
Configuration Storage: Yes
threshold without any parameter will display the current status for
threshold setting information
threshold is a device-level command.
DESCRIPTION
threshold command is used to set rules for monitoring the system.