Trango Systems TrangoLINK GigaPlus - Ftp

Trango Systems, Inc. GigaPlus User Manual Rev 3.1 162
freq_duplex without any parameter will display the current duplex value
ONLY for HP ODUs
DESCRIPTION
Sets the duplex value to be used for programming the transmit frequency
and therefore the receive frequency.
ftp
SYNTAX
ftp
ftp <server_ip> <user_name>
ftp> get <file_name>: perform ftp get command. Get file from the ftp
server
ftp> mode: configure ftp operation mode. Passive or active.
ftp> put <file_name> <server path>: perform ftp put command. Put file to
the ftp server
ftp> logout: logout of ftp session.
Default: server_ip=NULL, user_name=NULL, mode=Passive
Configuration Storage: No
DESCRIPTION
To perform ftp operation. Provide the command with the ftp server IP and
the user login. Enter the password when prompted.
ftp> get <file_name>: Do NOT supply the path to the file that needs to be
put on to the. It will be stored in the default system directory
See example below.
ftp> put <source file> <destination>: source will be the filename only,.