syslog
syslog [0-2]
syslog clear
syslog export
Default: 0: SET, 1: EVENT
Configuration Storage: Yes
syslog without any parameter will display all the system log message
for up to 3000 lines.
syslog takes a parameter for log level: 0=SET, 1=EVENT, 2=STAT
syslog export, export the syslog to a syslog.txt file which can be tftp
by customer.
syslog is a system-level command.
syslog: will display all the system log entries that have been
recorded since the boot up.
syslog clear: Clear all syslog. Only 3000 log entries will be captured
and will wrap around when overflows.
To Next Page
Loading...