Trango Systems TrangoLINK GigaPlus - Page 139

Trango Systems, Inc. GigaPlus User Manual Rev 3.1 139
iduled
Display the iduled function (TDM or RSSI)
ipconfig
Display radio management port configuration
license
Display license enable status
link_history
Display how many times link dropped since power on
linktest
Display link test values (RSSI, MSE, BER)
loglevel
Display the current loglevel for the syslog
loopback
Display loopback Mode
model
Display IDU/ODU Model and serial number
mse
Display the MSE (Mean Square Errors) value
oduled
Display ODU rssiled status
odupower
Display ODU Power status
odurxagc
Display ODU Rx AGC status
opmode
Display Operation Mode status
power
Display Tx power in dBm
remark
Display product remarks
rps
Display current status of rapid port shutdown
rssi
Display RSSI value
show
Show running system information
siglevel
Display signal path debugging parameters
smart_mode
Display the current smart mode status (on/off)
snmpd
Display SNMP Agent Daemon (snmpd) status
speed
Display current modulation and symbol rate(speed)
status
Display status for different device and ports
sync_status
Current 1+1 HSB peer sync status (Failover active)
sysinfo
Display MSE, FER information
syslog
Display system event log
targetrssi
Display target rssi value
tdm
Display TDM configuration
telnetd
Display telnetd server (telnetd) status