Trango Systems, Inc. GigaPlus User Manual Rev 3.1 121
LOCK RSSI MSE BER Tx Rx
1> 1 -38.00 -35.00 0.00E+00 128QAM 128QAM
Step 9: Save the configuration
Run the config save command to save all the settings that were changed into non-
volatile FLASH memory. If a power interruptions should occur, the link will re-establish
itself after the interruption is over . (assumes default_opmode on was enabled and the
configuration saved prior to the power interruption).
To Next Page
Loading...