Configure MVR port settings
Multicast > MVR > Property
1. Log into your switch management page (see “Access your switch management page”
on page 11).
2. Click on Multicast, click on MVR, and click Port Setting.
3. Select the port in the list and click Edit to configure the MVR port settings.
• Port: Displays the selected port number.
• Role: Set the MVR port role.
• Immediate Leave: Check the option to enable IGMP immediate leave on the
selected port.
4. Click Apply.
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK.
To Next Page
Loading...
Need help?
General