TRENDnet TPE-3012LS User Manual

© Copyright 2020 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPE-3012LS / TPE-3018LS
168
Configure RMON Event Table
Management > RMON > Event
1. Log into your switch management page (see “Access your switch management page”
on page 11).
2. Click on Management, click on RMON, and click on Event.
3. Click "Add/Edit" button to Add/Edit an event. Review the settings.
Notification
Specify the notification type for the event, and the
possible value are:
● None: Nothing for notification.
● Event Log: Logging the event in the RMON Event Log
table
● Trap: Send a SNMP trap.
● Event Log and Trap: Logging the event and send the
SNMP trap
Community
Specify the SNMP community when the notification type is
specified as “Trap” pr “Event Log and Trap”
Description
Specify the description for the event.
Owner
Specify owner for the event.
4. Click Apply.
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration. Click OK.
Item
Description

TRENDnet TPE-3012LS Specifications

General

Brand	TRENDnet
Model	TPE-3012LS
Category	Switch
Language	English