4. Click Apply.
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK.
PoE Scheduling
PoE > PoE Scheduling
This section allows you to set a schedule for each PoE port when PoE should be enabled.
Note: Please make sure to set your time and date settings accordingly under Network >
System Time before using this feature.
1. Log into your switch management page (see “Access your switch management page”
on page 11).
2. Click on Management and click on Time Range and click Add to add a new schedule.
3. Review the settings below.
• Range Name - Enter a name or description to easily identify the schedule
(optional)
• Date – Select the days that PoE should be enabled and enter the time range
From and To (24-hour format). Click Apply to save the schedule configuration
and the schedule entry will appear in the list.
3. Click on PoE and click on PoE Scheduling. Check the first entry in the list and click Edit.
To Next Page
Loading...
