© Copyright 2020 TRENDnet. All Rights Reserved.
Configure DHCP Option 82 settings
Security > DHCP Snooping > Option82 Property
1. Log into your switch management page (see “Access your switch management page”
on page 11).
2. Click on Security, click on DHCP Snooping, and click on Option82 Property.
3. Review the settings below.
Set checkbox to enable user-defined remote-ID. By default,
remote ID is switch mac in byte order.
Input user-defined remote ID. Only available when enable
user-define remote ID.
4. In the table, select the ports to configure for Option 82 and click Edit.
Display selected port to be edited
Set checkbox to enable/disable option82 function of
interface.