Item Description
\fv 0 = No error
1 = Supply voltage (Vh or Vi) too high
2 = Supply voltage (Vh or Vi) too low
\pa Average heating power
\ra Heater resistance
\ta Transducer temperature
\ti Internal temperature
\vh Heater voltage
\vi Supply voltage
Example
In this example a new data message with identification number 1 is defined. The items
included in the message are average wind speed, average wind direction, and supply
voltage. S msg1,$\ws,\wd,\vi\cr\lf
When the above message is polled, WMT700 sends the following data if the average
wind speed is 5 m/s, the average wind direction is 128 degrees, and the supply voltage is
23.4: $05.00,128,23.4<CR><LF>
WMT700 User Guide M211095EN-H
112
To Next Page
Loading...
